A-Neuvideo ANI-HDR-100 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik A-Neuvideo ANI-HDR-100. A-Neuvideo ANI-HDR-100 12 stron. Hdmi 18gbps extender over cat5e/cat6 transmitter & receiver
Drukuj stronę
A
NEUVIDEO
FEATURES
• HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant
• Video resolutions up to 4K2K@50/60Hz (YUV444)
• 10bits HDR (High Dynamic Range) pass through
• Supports HDMI High Bit Rate (HBR) audio pass through
• Supports CEC bypass
• Optical audio supports LPCM 2CH, Dobly Digital 2/5.1CH, DTS 2/5.1CH
• POC (Power Over Cable) function is supported, either the TX or RX is powered by 24V@1A power supply, the other does not need
a power supply from the DC jack. POC power consumption is less than 10W.
• Transfer Bidirectional infrared control signal together with the HDMI signal.
• Transfer Bidirectional RS-232 control signal together with the HDMI signal.
• Transmission distance: Over CAT6 cable
• 328ft (100M): 1080p@60Hz 36bit; 3D1080p@30Hz 36bit
• 230ft (70M): 1080p@60Hz@48bit; 1080p@120Hz@24bit; 3D-1080p@60Hz@36bit; 4K2K@30Hz@24bit;
4K2K@50/60Hz (YUV420); 4K2K@50/60Hz (YUV444)
cable termination
CAUTION: The extender using UTP termination, which follows the standard of direct interconnection method.
FEATURES & cable termination
2