Kohler Torsion Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Produkt hydrauliczny Kohler Torsion. Kohler Torsion 24 stron. Hinged door
Również dla Kohler Torsion: Instrukcja instalacji (30 strony)
Drukuj stronę
future reference.
We recommend that the unit is installed by a qualified shower installer or plumber.
General
1.
2.
3.
4.
Safety Information
1.
Care should be taken to avoid hidden pipes or wires when drilling into walls and floors.
2.
3.
4.
5.
Attention
1.
Ensure the door is undamaged and no parts are missing.
2.
Ensure the panel size is suitable for the installation. Tempered glass cannot be cut.
The wall retainers must be installed onto a waterproof, vertical and flat wall surface.
3
Failure to do so will result in an unsatisfactory seal, which may cause property damage.
The wall inclination (out-of-squareness) is should be out by no more than ±4mm/m.
4.
It is the responsibility of the INSTALLER to ensure that the installation complies with
council and/or local authority bylaws.
5.
Instructions, drawings and diagrams contained in this manual present information
available at the time of printing. Although every attempt has been made to keep them
up-to-date, KOHLER reserves the right to implement product changes without
futher notice.
INTRODUCTION
GENERAL INFORMATION
2