AEG X66453MVO Podręcznik użytkownika - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Okap wentylacyjny AEG X66453MVO. AEG X66453MVO 20 stron. Cooker hood
Również dla AEG X66453MVO: Podręcznik użytkownika (36 strony), Instrukcja instalacji (12 strony)

Drukuj stronę

Wall drilling and bracket fixing

As a first step, proceed with the following drawings:

• a vertical line up to the ceiling or up to the upper limit,

at the centre of the area in which the hood is to be

fitted;

• a horizontal line at a minimum 1004 mm above the

cooker top.

• Mark a point (1) on the horizontal line, 247 mm to the

right of the vertical reference line.

• Repeat this operation on the other side, checking that

the two marks are levelled.

• Mark a reference point (2) as indicated at 210 mm

from the vertical reference line and 482 mm above the

cooker top.

• Repeat this operation on the other side, checking that

the two marks are levelled.

• Drill at the marked points (1), using a ø 12 mm drill bit.

• Drill at the marked points (2) using a ø 8 mm drill bit.

• Insert the bracket plugs 11a into the holes (1) and

tighten the screws.

• Insert plug 11 into holes (2).

To install a decorative chimney ( optional )

• Place bracket 7.2.1 on the wall, about 1-2 mm from

the ceiling or from the upper limit, aligning the centre

(notch) with the vertical reference line.

• Mark the wall at the centres of the bracket holes.

• Place the bracket 7.2.1 on the wall at X mm below the

first bracket (X = height of the upper chimney section),

aligning the centre (notch) with the vertical line.

• Mark the wall at the centres of the bracket holes.

• Drill ø 8 mm holes at all the marked centre points.

• Insert the wall plugs 11 in the holes.

• Fix the brackets using the 12a screws (4,2 x 44,4) sup-

plied with the hood.

INSTALLATION INSTRUCTIONS

��

INSTALLING THE COOKER HOOD

��

�

��

�

��

�

��

�