A-Neuvideo ANI-2PIP-LOGO Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 20 stron. 2x1 hdmi multiviewer
Również dla A-Neuvideo ANI-2PIP-LOGO: Instrukcja obsługi (15 strony)

Drukuj stronę

NEUVIDEO

■ Edit: Clicking this button opens the OSD Information Edit window to change the formatting of the OSD.

•

LOGO SETTINGS: This section provides control over the content and position of the user uploaded logo image.

■ Logo Display: Clicking this button will display the customized text message on the OSD.

■ H-Pos: Sets the horizontal position of the user logo, set in percentage.

■ V-Pos: Sets the vertical position of the user logo, set in percentage.

■ Upload New LOGO: To upload a graphic logo, please click the "Choose File" button to open the file selection window and then

select the graphic logo file (8-bit *.bmp format, 1920x1080 max resolution) located on your local PC. After selecting the file, click

the "Upload New LOGO" button to upload the logo to the unit.

• CHROMAKEY SETUP TAB:

mode will automatically switch to displaying Input 1 underneath Input 2 with the selected key values applied to Input 2's source

video. The unit comes with 8 pre-defined standard key definitions (White, Yellow, Cyan, Green, Magenta, Red, Blue, Black) and a

User configurable definition set.

■ R Maximum/Minimum: When "User" is selected, sets the maximum and minimum range for the red component of the

chromakey (from 0-255).

■ B Maximum/Minimum: When "User" is selected, sets the maximum and minimum range for the blue component of the

chromakey (from 0-255).

■ Chromakey: Enable or disable the chromakey function of the unit. When chromakeying is enabled, the unit will automatically

switch both windows to be full screen with Channel Window 1 in front of Channel Window 2. The keying will be applied to Channel

Window 1.

NOTE: Selecting any other Windowing mode will automatically disable chromakeying.

This tab allows for the activation and configuration of Chromakey mode. Enabling the Chromakey

Text: Define a text string to display on the OSD.

Font Color: Set the color of the OSD font.

Background Color: Set the background color of the OSD's text block.

• CHROMAKEY SETUP: This section provides

all controls relating to the chromakeying function

of the unit.

■ Color Set: Select from a list of pre-set

chromakey ranges (White, Yellow, Cyan,

Green, Magenta, Red, Blue, Black) to perform

simple, hassle-free keying or select "User" to

enter in custom keying value ranges. Clicking

"Save to User" will copy the currently selected

pre-set ranges into the "User" slot for editing.

■ G Maximum/Minimum: When "User" is

selected, sets the maximum and minimum

range for the green component of the

chromakey (from 0-255).

WebGUI Control