Kohler Englefield K-5627X Instrukcja instalacji i obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Armatura łazienkowa Kohler Englefield K-5627X. Kohler Englefield K-5627X 37 stron. Electric shower

Drukuj stronę

Installation

Select a suitable position in the bathroom.

Remove the screw at the bottom of the unit.

Remove the front cover from the bottom

and then lift up the front cover.

Mark 3 mounting holes of the heater base on

the wall. The heater position should be 1.5 m

above the bathroom floor.

Drill 1 hole (upper part of heater base) with

6 mm drill and make the anchor holes

in depth of 34 mm.

Rehearse heater unit installation for anchor

mounting location determination.

Drill 2 holes (lower part of heater base)

with

6 mm drill and make the anchor holes in depth of 34 mm.

For K-5627X:

wall. It is recommended that the top of the portion is in level with the top of

heater.

For K-72989X

the wall.

K-72989X:

Bracket

Screw

Drill 2 holes

with

6 mm drill

and make the

anchor holes

in depth of 34 mm.

Insert the anchors

and mount the heater

firmly in position with

the screws provided.

Insert the shower holder and

soap tray into the slider rail.

Mount the slider rail to the rail bracket.

Remove the cap from the rail bracket and screw the bracket to marked

position. Replace the cap.

1237889-X2-G

Mark 2 mounting holes of the slider rail beside the heater on the

: Mark 2 mounting holes of the brackets beside the heater on

Install with Bracket

Anchor

Adjustable

Shower Holder

K-5627X:

Install with Slider Rail

Cap

Screw

Rail

Bracket

Slider Rail

Flexible Angle

Adjustment

Soap

Tray

Anchor

4 Spray

Patterns

Selection

Handshower

Flow

Regulator

Rubber

Washer

Flexible Hose

Kohler Co.