Kohler K-10124 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Armatura łazienkowa Kohler K-10124. Kohler K-10124 12 stron. Shower arm and flange

Apply

plumbers

putty.

Setscrew

Adapter (Not

Provided)

Showerhead (Not Provided)

1. Install the Shower Arm

NOTE: The showerhead with adapter are not provided.

Remove the temporary nipple from the shower ell.

Apply a bead of plumbers putty or other sealant to the back of

the wall ﬂange according to the manufacturer's instructions.

Place the wall ﬂange onto the long end of the shower arm just

below the threads, as illustrated.

Apply thread sealant tape to the threads of each end of the

shower arm.

Place the shower arm in the shower ell.

Carefully tighten the shower arm to the shower ell with a clean

strap wrench.

Press the wall ﬂange against the ﬁnished wall.

Secure the ﬂange to the shower arm by tightening the setscrew.

Remove any excess putty.

Turn on the water and allow water to ﬂow through the shower

arm to ﬂush the system of any debris.

Turn off the water.

Thread the adapter (not provided) onto the showerhead until

hand-tight.

Hand tighten the showerhead (not provided) to the shower arm.

Kohler Co.

Shower Ell

Wall Flange

Shower Arm

1046641-2-A