Kohler K-1234 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Armatura łazienkowa Kohler K-1234. Kohler K-1234 16 stron. Removable bath/whirlpool apron
Również dla Kohler K-1234: Instrukcja instalacji (13 strony)

Drukuj stronę

Tools and Materials

Pencil

Square

Before You Begin

Observe all local plumbing and building codes.

Unpack and inspect the apron for damage. Return the apron to the carton until you are ready to

install it.

The apron must be installed before the ﬁnished ﬂoor and wall materials are installed.

This apron system is designed to have the ﬁnished wall materials [1-1/2" (3.8 cm) maximum

thickness] go over the apron columns. It is also designed to have the ﬁnished ﬂoor materials [2" (5.1

cm) maximum thickness] butt up against the channel.

The apron can be used as an access to the whirlpool pump and controls, when applicable. However,

additional access may make servicing of the pump and controls easier.

NOTE: Before installing the apron, ﬁll the bath/whirlpool with water and check the drain system for

leaks. If applicable, test the whirlpool system for leaks and proper operation.

Kohler Co. reserves the right to make revisions in the design of products without notice, as speciﬁed

in the Price Book.

1011308-2-D

Tape

Measure

Safety

Drill/

Glasses

Drill Bits

Phillips

Screwdriver

Plus:

• Construction Adhesive

• Conventional Woodworkng Installation Tools and Materials

• Support Structure Materials (2x2s or 2x4s)

• Shimming Material (as needed)

Flat-Blade

Screwdriver

Kohler Co.