Kohler Escale K-25091T-S Instrukcja instalacji - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Toalety Kohler Escale K-25091T-S. Kohler Escale K-25091T-S 30 stron. Floor standing toilet
Również dla Kohler Escale K-25091T-S: Instrukcja instalacji (23 strony), Instrukcja instalacji (11 strony), Instrukcja instalacji (28 strony)
B. Methods two and three: During remote installation, fix
the cover onto the tank and pull the air hose to the
panel. Reserve access panel at front or top to ensure
removal and installation of cover.
B.
Method two: During remote plate installation,
7~20mm thickness is recommended for the wall of
the pinch plate and at least 80mm gap is reserved.
Recommended installation hole size of
+2
+2
297
X
157
mm to remote plate installation.
0
0
Method three: During remote installation of mask, 4
holes with diameter of 10mm and depth of 16mm are
needed to be reserved at the locating hose. Drill
10mm holes through air hose on the side of mask.
7~20mm
+2
297
X
0
4
10mm 16mm
C. Method four: Cut apart the cable of the air hose. Pull
it out from the front of the tank and meanwhile
reserve the access panel. Fix the four plates with
screws and then fix the support board.
Note:
No direct contact between the faceplate and the
tank.
7~20mm thickness recommended for the wall of
the pinch plate.
Recommended installation hole size of
+2
297
X
157
0
C.
1288818-T01-B
80mm
+2
157
mm
0
+2
mm to remote plate installation.
0
7~20mm
+2
+2
297
X
157
0
Pinch plate installation
Pinch plate
Supporting Board
Supporting
Board
Air hose
10mm
Air hose
mm
0
Air hose
Screw
Faceplate
-10-
Cover,Top
Cover,Front
Air hose
10 Depth 16,
Space reserved
10 16
Pinch plate
7~20mm recommended
7~20mm
Finished wall
At least 80mm gap reserved
297
Method four:
Press from front
Pinch plate
Finished wall
Pinch plate
7~20mm recommended
Finished wall
Supporting
Board
At least 80mm gap reserved
Fix Mask Onto Wall
Finished
wall
72
80mm
+2
0
+2
157
0
At least 80mm gap reserved
80mm
7~20mm
80mm