Kohler Innate K-8340TW-2EX-0 Podręcznik właściciela domu - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik właściciela domu dla Toalety Kohler Innate K-8340TW-2EX-0. Kohler Innate K-8340TW-2EX-0 47 stron. Intelligent toilet
Drukuj stronę
Low voltage alarm
Note: please replace battery in time when the voltage alarm starts.
When M battery alarm icon blinks indicate remote battery is almost used up. Replace battery is required.
Pairing
When cover and seat is powered on, long press dryer button, when all lights quick blinks twice, dryer light blinks
slowly. Long press Front and Rear Wash buttons both on side panel simultaneously in 20s, release button until
one short beep is generated. When light strip stops blinking indicates pairing is successful.
Communication between remote control and toilet
When remote moves away from sensing zone, press any button, all light strip will blinks slowly, starts searching
connection. After successful connection, it will stop blinking.
Remote controller setting guide
Note: Normal function will not be used when initiate any long press setting.
Keep pressing the
times. Then change the setting of B/D/G/I/J/K/L by the following requirements.
B - Front Wash...night light setting
Long press this button to start night light setting mode, Front Wash icon blinks slowly; press Front Wash icon
to change setting per activation or deactivation circulation.
1. When Front Wash indicating LED lights up, indicates night light starts. Toilet generates one short beep.
2. When Front Wash indicating LED lights OFF, indicates night light stops. Toilet generates one long beep.
D - Massage...prolonged seating indication setting
Press and hold this button to enter prolonged seating indication setting, massage icon starts blinking slowly.
Press massage icon for different setting per activate or deactivate circulation.
1. When massage indicating LED lights up, indicates prolonged seating indication function starts. Toilet generates one short beep.
2. When massage indicating LED lights OFF, indicates prolonged seating indication function stops. Toilet generates one long beep.
G - Ring temp ... energy saving setting
Long press this button to start energy saving setting, seat temp icon blinks slowly. Press seat temp icon again
to change per starts and stops circulation.
1. When Seat Temp indicating LED lights up, indicates energy saving function starts. Toilet generates one short beep.
2. When seat temp indicating LED lights OFF, indicates energy saving function stops. Toilet generates one long beep.
Kohler Co.
I
J
A
B
key until a short pip is heard, and release the key only after the night lamp flickers for three
K
C
D
E
9
L
M
F
G
H
1408701-TW01-B