Kohler K301 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Silnik Kohler K301. Kohler K301 40 stron. 3/4 inch high-flow deck/rim mount bath valve
Również dla Kohler K301: Instrukcja obsługi (17 strony), Instrukcja obsługi (14 strony), Instrukcja obsługi (17 strony), Wielojęzyczna instrukcja obsługi (8 strony)

Drukuj stronę

7/8" D.

1-5/16" D.

5/8" O.D. Tubing (1/2" Nom.)

7/8" I.D.

(3/4" Nom.)

Finished Deck And Rim Mount Roughing-In

1-5/16" D.

5/8" O.D. Tubing

7/8" I.D.

(1/2" Nom.)

(3/4" Nom.)

Rough Deck Plus Finished Deck (Tile) Roughing-In

1. Prepare the Site

X = the distance from the centerline of the spout inlet base to the

front of the spout base plus 1/2" (2.5 cm).

Y = the distance between the valve centerlines varies. Check the

handle and spout installation instructions for exact dimensions.

Install or relocate the water supplies as needed.

Protect the surfaces of the bath/deck during installation.

Ensure that holes drilled into the deck are not oversized. The

spout and valves require adequate base material strength and

maximum contact area with the deck.

NOTE: Reinforcing material may be required if the deck or rim is

thin. Install 1/2" exterior grade plywood before proceeding.

NOTE: For installations to be covered with tile, the tile thickness

must not exceed 1-1/4" (3.2 cm).

For installations with 8" (20.3 cm) centers using copper tubing

(1/2" nominal, 5/8" OD), cut two 2-7/8" (7.3 cm) pieces and one

2-3/8" (6 cm) piece of tubing.

113969-2-AC

1/2" (1.3 cm) Min.

2-1/8" (5.4 cm) Max.

1-13/16"

Deck Thickness

(4.6 cm)

5-5/8"

4-5/8"

(14.3 cm)

(11.7 cm)

1/8" (3 mm) Min.

2-1/8" (5.4 cm) Max.

Rim Thickness

2-1/16"

1-1/4" (3.2 cm) Max.

(5.2 cm)

Tile Thickness

7/8" D.

1/2" (1.3cm) Min.

2-1/8" (5.4 cm) Max.

Rough Deck

Thickness

Kohler Co.