Kohler Englefield VALENCIA Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz Kohler Englefield VALENCIA. Kohler Englefield VALENCIA 7 stron. Double drawer vanity
Również dla Kohler Englefield VALENCIA: Instrukcja instalacji (7 strony)

Drukuj stronę

VALENCIA

/ VALENCIA ELITE

CONSTRUCTION REQUIREMENTS:

Cabinets must be ﬁxed to a nog and at least one stud in the wall. The nog size should be 5 0 x 7 5 mm.

Use a stud ﬁnder to locate studs & nogs in ﬁnished walls.

TOOLS AND MATERIALS REQUIRED - (Not Supplied)

TOOLS

To suit pipework

INSTALLATION:

1. Drawer removal

( a) Open the drawer and carefully lift up on

the end of the drawer to release it from

the runner locator pins. It may be necessary

to gently pry the runner away from the

drawer.

Locator pin

1278274-A02-D September 2023

Single Drawer Vanity

850

To suit screws

Stud finder

Page3

INSTALLATION INSTRUCTIONS

50mm from top of cabinet

to centre of nog.

A height of 850mm from the

ﬂoor to the top of the vanity

top is recommended.

MATERIALS - Not supplied & must be purchased separately

10g x 75mm

Screws (Refer step 3)

( b) The drawer is now only held by the runner

hooks at the back and can be pulled out in

the direction shown.

Runner hook

20mm

Fixing washers