Mode 4 - Beverage Mode
• There are two different weighing units in Beverage Mode: gram and ounce.
• As soon as the weight is stabilized or the tare button is pressed, the next step will show
in display.
• AFTER the process is completed and the filter is removed, the display will blink and flash
between the water weight and beverage weight (marked with "b").
Display
CUP
FLt
COF
Timer Flashes
-FLt-
bxxxx.x
xxx.x
Action
Next Step
Previous Step
Stop Timer
Reset Mode
Switch Mode
Mode 5 - Auto-Tare Mode
• The LED display shows [ Atr
• The LED display shows [ Atr 0.00 ] with the timer on the left and the weight on the right in ounces.
Action
Tare Weight
Reset Mode
Switch Mode
Designed for pour overs and extraction measurements. Follow
instructions on the display to place the carafe/cup, filter, and
coffee (tap tare in between steps). The timer will start when
the first flow of water is detected. Timer stops when the power
button is tapped or items are removed (dripper). The flashing
number is the beverage weight with all items subtracted.
Action/Description
Put the carafe/cup on the scale
Put the filter in your pour over dripper and place on the carafe/cup
Put the coffee in the filter
Ready to brew
Remove the filter
Beverage Weight
Total Weight
Operation
Tap Tare button
Tap Power button
Tap Power button
Double tap Tare button
Long press Power button
(for versions after 2.0.008)
Displays weight only. The scale will automatically tare
when an item is placed on and taken off the scale.
0 ] with the timer on the left and the weight on the right in grams.
Operation
Tap Tare button
Double tap Tare button
Long press Power button
8