AQC MAXIPLY DMP-170S Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odpylacz AQC MAXIPLY DMP-170S. AQC MAXIPLY DMP-170S 20 stron. Open type dust collector
Drukuj stronęMultiple pocket type dust collector
3.1
Each MAXIPLY unit includes:
•
Welded steel hopper.
•
25 gallon dust bin.
•
Quick-clip dust bin removal system.
•
1 polyester filter envelope having between 170 to 700 sq. ft of filter surface. Maximum air to
cloth ratio to be 10:1.
•
Various hardware.
•
Handle for filter shaker cleaning action.
•
Aluminum direct drive radial type fan/motor assembly.
•
3 step paint preparation: degreasing, primer and polyurethane base paint final coat.
The MAXIPLY unit is shipped partly assembled and some components will require field assembly.
This will allow the dust collector to be assembled in an area where the access doors are narrow
where fully assembled unit would not fit through the doorway frame. The electrical connection of
the fan motor must be performed by a qualified electrician.
4
NORMAL USE AS PER NFPA 664
The MAXIPLY unit is designed to filter harmful dusts from the air resulting from a fabrication
process. Each MAXIPLY dust collector is built based on the request and information supplied by the
customer for a given application and should not be used for any other application unless approved
by A.Q.C., Inc. The dust collector should be used at intervals in order for the filter envelope to be
cleaned at the end of each cycle of use.
5