Aqua HC 100 Instrukcja obsługi i konserwacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Pompa wodna Aqua HC 100. Aqua HC 100 20 stron.
Również dla Aqua HC 100: Instrukcja obsługi i konserwacji (19 strony)
Drukuj stronę
- 1. Table of Contents
- 1. 1 General Comments
- 2. 2 Technical Characteristics
- 2. Hydraulic Connection
- 2. Programming
- 2. MAINTENANCE 3.1 General Maintenance Comments
- 3. 3 0 Maintenance
- 3. Replacing Worn Parts
- 3. Commonly Reported Problems
- 3. Chemical Compatibility Table
- 3. Warranty Certificate
- 3. Connections
ENGLISH
1.0 GENERAL COMMENTS
1.1 Warnings
The aim of HC100 pump manual is to provide you with all the necessary information for the correct
installation and maintenance in order to give you optimum results whilst in operation.
For this reason it is really important you read giving attention to the instructions given below since they
furnish all the indications necessary for the correct installation, use and maintenance
This manual has to be preserved with care to be consulted in whatever occasion.
At the moment of the receipt you have to check the integrity of the panel and of all its
components, in case of anomalies consult skilled staff before making interventions.
Before the installation of the pump check that all the data on the pump's label correspond
to those of the electrical plant.
Do not operate with bare/naked hands or feet
Do not leave the equipment exposed to the action of the atmospheric agents.
Avoid splashing water
The equipment has to be operated by a skilled person.
In case of improper functioning of the panel switch off and contact our technical
department for any necessary repairs.
For the correct functioning it is necessary to use original spare parts and original
accessories. The producer refuses any responsibility in reference to break down due to
tampering or the use of none original spare parts and accessories.
The electrical plant has to be in conformity with the rules of the country where it is
operating.
The room temperature of utilisation can not exceed 45° C
1.2 Design standard
Our pumps are manufactured according to General Standards in force and in compliance with the
following European Directives:
n° 2014/30/CE " E.M.C.
n° 2014/35/CE "DBT Low Voltage Directive"
n° 2011/65/UE , 2012/19/UE "direttive RoHs e WEEE"
However, we think that in order to obtain a high trustworthiness and a lasting functioning pump it is
necessary to follow our manual particularly in reference to the maintenance!
The Producer declines all responsibility in reference with whatever works carried out on the equipment
from none skilled personnel!
HC100/N/240717/NW
2