Aqua Clear 70 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody Aqua Clear 70. Aqua Clear 70 13 stron. Power filter

Mount Power Filter onto

rear of aquarium and

adjust leveling device by

turning to required

setting.

NOTE:

If necessary, an

additional adjustment

may be made to level

Power Filter by breaking

off the leveler bar at

base of motor.

POWER FILTER START-UP

a) Fill Power Filter case completely with water and replace cover.

b) Adjust water flow control lever on intake "U" tube to its

maximum position for initial start-up.

c) Plug power cord into electrical outlet.

Allow 30-45 seconds for priming (air to

be expelled from "U" tube.)

d) After priming has been completed,

move adjustment control on intake

"U" tube to adjust water flow rate as

required.

(See How it Works- Patented

Refiltration System.)

DO NOT OPERATE FILTER WITHOUT WATER

NOTE:

For maximum filter operation and efficiency, regular cleaning

of the filter and its parts is recommended every two weeks. Soap or

detergents are NOT recommended for filter maintenance.

(See Power Filter Maintenance.)

IMPORTANT