Dexin DSM2500C Podręcznik użytkownika - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Modulator Dexin DSM2500C. Dexin DSM2500C 17 stron. Ip to analog modulator

Drukuj stronę

Chapter 4 Troubleshooting

DEXIN's ISO9001 quality assurance system has been approved by CQC organization. For
guarantee the products' quality, reliability and stability. All DEXIN products have been passed
the testing and inspection before ship out factory. The testing and inspection scheme already
covers all the Optical, Electronic and Mechanical criteria which have been published by DEXIN.
To prevent potential hazard, please strictly follow the operation conditions.
Prevention Measure
 Installing the device at the place in which environment temperature between 0 to 45 °C
 Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if
necessary
 Checking the input AC voltage within the power supply working range and the connection is
correct before switching on device
 Checking the RF output level varies within tolerant range if it is necessary
 Checking all signal cables have been properly connected
 Frequently switching on/off device is prohibited; the interval between every switching
on/off must greater than 10 seconds.
Conditions need to unplug power cord
 Power cord or socket damaged.
 Any liquid flowed into device.
 Any stuff causes circuit short
 Device in damp environment
 Device was suffered from physical damage
 Longtime idle.
 After switching on and restoring to factory setting, device still cannot work properly.
 Maintenance needed
DSM2500C IP to Analog Modulator User Manual
13
13