AvL Technologies SkyEdgeII Podręcznik interfejsu i odniesienie - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik interfejsu i odniesienie dla Modem AvL Technologies SkyEdgeII. AvL Technologies SkyEdgeII 11 stron.

When setting the system to communicate by Ethernet, it is important to make sure the controller has a network path

to the Ethernet to Serial server so the controller can query the modem over the network. This is done by configuring

the Customer Network 1 or Customer Network 2 settings.

Note: If the modem is connected to the controller through a CIP that has been configured as a router, the Gateway

must be set to 192.168.129.1

Path

Main Window  File  Settings AAQ Network Interface Options

Level 1

3. Configuration

Path

Main Window → View  Configuration Core

Level 4

Modify the following configuration items to enable interaction of the controller to the modem. The configuration

varies depending upon the physical connection method, Ethernet or serial. If configuring to communicate over a

network set the SkyEdge II module to use the IP address and Port Number that the modem is set to.

SkyEdgeII Modem