Aqua Computer poweradjust 3 Instrukcja obsługi i instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Kontroler Aqua Computer poweradjust 3. Aqua Computer poweradjust 3 20 stron. Usb unit is a high power fan or pump controller for pcs

Drukuj stronę

POWERADJUST 3

1. Preface

The poweradjust 3 USB unit is a high power fan or pump controller for PCs. The

output features speed signal detection, additionally the poweradjust 3 USB unit

has a temperature sensor input, a flow sensor input, a speed signal output as well

as USB and aquabus interfaces.

Considering the fast technical development, we reserve the right to perform alter-

ations to the products at any time. It therefore is possible that your product does

not correspond precisely to the descriptions or illustrations in this manual.

2. Safety precautions

The following safety precautions have to be observed at all times:

Save your data onto suitable media before working on your hardware!

●

The poweradjust 3 USB unit may only be used inside a PC case!

●

Never touch electronic components during operation! Do not connect or

●

disconnect cables to/from the device while the device is powered! Compo-

nents may get very hot during operation. After power off, let the device cool

down for at least 30 minutes before touching it!

Do not turn the PC on unless you are sure that all cable connections to/from

●

the poweradjust 3 USB unit are correctly attached!

This product is not designed for use in life support appliances, devices, or

●

systems where malfunction of this product can reasonably be expected to re-

sult in personal injury. Aqua Computer GmbH & Co. KG customers using or

selling this product for use in such application do so at their own risk and

agree to fully indemnify Aqua Computer GmbH & Co. KG for any damages

resulting from such application!

3. Scope of delivery

One poweradjust 3 USB controller

●

One internal USB cable

●

One aquabus/speed signal cable (3 contacts)

●

One connection cable for a Laing DDC pump

●

Mounting materials

●

This manual

●

4. 4. 4. 4. Assembly instructions

Assembly instructions

Use the supplied screws to install the poweradjust 3 USB controller inside your PC

case. Make sure that the PCB and electronic components do not have contact to

metal parts or other electronic devices inside the PC case, otherwise malfunctions

or destruction of the poweradjust 3 USB unit or other devices may occur!

- 4 -

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen

aqua

computer