Aqua Computer ULTITUBE D5 150 Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt komputerowy Aqua Computer ULTITUBE D5 150. Aqua Computer ULTITUBE D5 150 8 stron.

Drukuj stronę

aqua

computer

4.8. Restore factory defaults

4.8.

Restore factory defaults

There are two options to reset the pump controller to factory defaults. Restoring

factory defaults may be useful if the pump is not properly operating or if erroneous

settings have been saved into the pump.

1. aquasuite: Click the "Reset device to factory defaults" button on the "Sys-

tem" screen.

2. Device menu: Select "System", then "Factory defaults" and confirm by press-

ing the middle key.

4.9. Full manual and aquasuite software

4.9.

Full manual and aquasuite software

For configuration and monitoring of D5 NEXT pumps, the aquasuite software is

available for download from our website www.aqua-computer.de. You will find the

most up-to-date version as well as the complete operation manual for the D5

NEXT pump in the support section of the website.

5. 5. 5. 5. D5 PWM

D5 PWM

This chapter applies to variants with D5 PWM pump only (product numbers 34097,

34098, 34099).

5.1.

5.1. Electrical connections

Electrical connections

Connect the power supply connector of the pump to a matching connector of the

power supply unit of the computer.

The pump speed can be adjusted using a compatible PWM fan connector. For

monitoring purposes, the pump generates a speed signal. However, a valid speed

signal cannot guarantee an actual flow of coolant!

5.2.

5.2. Technical details D5 PWM

Technical details D5 PWM

5.2.

Technical details D5 PWM

Power supply voltage (Vin):

Current consumption:

Ambient temperature range:

Coolant temperature:

The pump must not run dry for longer periods of time!

6. 6. 6. 6. Technical details and care instructions

Technical details and care instructions

6.1.

6.1. Technical details

Technical details

Capacity:

Thread size:

Ambient temperature range: 10 to 40 °C (noncondensing)

Compatible coolants:

8 – 24 V DC

0.25 – 1.9 A

10 to 40 °C (noncondensing)

0 to 50 °C

ca. 230/350/470 ml (ULTITUBE 100/150/200)

G ¼

Double Protect Ultra, water

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen

ULTITUBE D5

- 7 -