AAVIX A11404 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Trymer AAVIX A11404. AAVIX A11404 8 stron. 22 inch 4.2 amp hedge trimmer
Drukuj stronęKNOW YOUR HEDGE TRIMMER
1. Cutting Blade
2. Safety Guard
4. Safety Switch
5. Cord
Retainer
7. Rear Handle
8. Power Cord
ASSEMBLY
BLADE COVER
WARNING! Ensure the hedge trimmer is
disconnected from the power supply before removing
cover and preparing for use.
Fitting and Removing the Blade Cover
The hedge trimmer comes with a blade cover to
protect the blades when storing. The blade cover must
be removed prior to operation.
1. Slide the blade cover off the blade.
2. To fit, slide the cover back over the blade.
WARNING! Never use the hedge trimmer with the
blade cover fitted.
SAFETY GUARD
1. Make sure that the safety guard is attached
securely.
CORD RETAINER
1. Make a loop with the extension cord and push it
through the hole under the on/off switch.
2. Place the loop onto the cord retainer and ensure it
is pulled firmly into place.
3. Front Handle
6. On/Off Switch
9. Blade Cover
Using an extension lead
Always use an approved extension lead suitable for
the power input of this tool. Before use, inspect the
extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always
unwind the lead completely. Use of an extension lead
not suitable for the power input of the tool or which is
damaged or defective may result in a risk of fire and
electric shock.
OPERATION
CHECKS PRIOR TO OPERATION
WARNING! Ensure the hedge trimmer is
disconnected from the power supply before
performing any of the following operations.
If any parts are missing, damaged or broken, do not
operate your Hedge trimmer until all damaged parts
have been replaced or repaired. Failure to do so could
result in serious personal injury. DO NOT USE
WITHOUT HANDLE AND GUARD.
6