A.B.S. Flexilo MINI Instrukcje montażu, obsługi i napełniania - Strona 7

Przeglądaj online lub pobierz pdf Instrukcje montażu, obsługi i napełniania dla Urządzenia przemysłowe A.B.S. Flexilo MINI. A.B.S. Flexilo MINI 19 stron. For wood pellets. construction: plug-in system galvanized

Drukuj stronę

Operating and Assembly Instructions – A.B.S. Flexilo MINI for wood pellets

Safety Information

2.2 Fire prevention

All fire prevention regulations must be satisfied prior to start-up. (subject to country-specific

modifications).

2.3 Earthing

Attention! Let the earthing of your pellet storage area be executed by a

specialized company.

•

All conductive parts of the silo must be grounded expertly.

•

In particular the removal system, the steel frame and the connecting armature have to be

earthed.

•

The filling lines must also be connected conductive and grounded professionally with a

cable (4 mm ²) to the potential equalization conductor (by a qualified electrician for

example).

•

Especially the earthing parts have to be connected to the potential equalization and/or the

main potential equalization with specific PA conductors.

2.4 Nameplate

The nameplate stating the calculated storage capacity must

be attached to the pellet silo at a readily visible location, e.g.

at the filling nozzle or on one of the frame's legs. The

nameplate is included in the shipping documents that

accompany Flexilo for wood pellets when it is delivered.

2.5 Maintenance

Regular cleaning of the bearing is required to ensure continuous, trouble-free and safe

heating operation. The fines content and the wood dust should be removed.

When cleaning, please note the following:

•

Enter storage areas only when in compliance with safety regulations: Switch off

heating and discharge system, adequately ventilate before entering.

•

Clean the removal system prior to new filling of dust and debris. Wear dust mask of

filter class P2.

•

Heat silo sack empty regularly and clean the silo sack through movement from dust

while the removal system is uninstalled.

Vacuum the storage out. In private storage, the cleaning can be done with

commercial vacuum cleaners with HEPA filters. The vacuum cleaner should not work

at the highest level to avoid overheating and to prevent ignition hazards.

•

For reasons of occupational health and safety, an industrial vacuum cleaner with filter

class M is required for cleaning pellet storages. Earth buried storage and all other

storages starting at a capacity of 40 tons may only be accessed with a CO warning

device.

•

Until the next filling process please fill the silo manually with pellets in sacks (through

the manual filling nozzle).

•

Please check if the silo has damages caused by rodents or other external influences.

Subject to technical change

Nameplate with calculated storage capacity

Issue 09/2016

Page 7 of 19