Aaware AEV13MZ Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Karta dźwiękowa Aaware AEV13MZ. Aaware AEV13MZ 5 stron. Far-field voice and sound capture
Drukuj stronęAaware
AEV13MZ
Far-Field
Voice
and
Sound
Capture
Quickstart
Guide
Powering
Up
Connect micro-USB cable to the JTAG-UART USB port (J2) as shown in figure 1, and the other side to a
PC/laptop (see figure 2). If you do not need access to the terminal (i.e. WiFi is setup), a USB battery can
also be used as the power source, and alternately plugged into the MiniZed AUX-PWR USB port (J6).
Figure 1: Power via UART-JTAG USB
Far-Field
Voice
Assistant
Operation
Upon power up and boot, the platform will go into voice-assistant mode and start listening for voice
commands based on the Wakeword "Alexa" (or optionally both "Alexa" and "Ok Google"). An LED will
blink in the direction of the detected WakeWord, and noise/interferrence suppressed audio will be
captured from that direction. See the User Guide for more details.
Figure 2: Aaware Wakeword Directional LED Blink