AAxeon Optolinx FCU-RACK16 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów AAxeon Optolinx FCU-RACK16. AAxeon Optolinx FCU-RACK16 2 stron. 16 slots universal media converter rack

Drukuj stronę

INSTALLATION AUXILIARY FIGURES

Accessories

Power code

Pulling cable x 1

Mount Ear x 2

Slider set x 16

Rubber pedestal x 4

Upper and lower slider

of Media Converter

When installing media converter into the Chassis.

1. Take off 4 screws from media converter.

2. Fasten two sliders with screws at the top and bottom locations.

Note:

For later use, there are 4 reserved screw holes on laterals for sliders.

If your media converters are older, please unscrew first.(Refer to Point 1)

If your media converters already has reserved lateral holes,please

fasten the sliders directly.(Refer to Point 2)

Top view with fans location

There are four screws which can be unfastened for fan replacement.

Mount Ear

Take screws off to remove mount ear

Slide in

Push media converter into 16 Slots Universal Media Converter Rack and fasten screw on

the slider of media converter

Fan replacement

AC 100-240V

1.Remove fan from 16 Slots Universal Media Converter Rack then pull power jacket off.

2.Take a new fan, put back power jacket, push fan back in 16 Slots Universal Media Converter Rack,

and fasten four screws

Mount Rack

Fasten screws in rack to fix 16 Slots Universal Media Converter Rack

Slide out with pulling

cable

Pull out media converters with pulling cable.

AC 100-240V

Turn off screws from the two sides of power supply then pull power supply out.

Power replacement

AC 100-240V