AVLink MaitreView 4KPlus Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik AVLink MaitreView 4KPlus. AVLink MaitreView 4KPlus 13 stron.

INSTALLATION

Note: Turn the power off for displays and video sources before beginning the installation.

1. Connect each video source to the input ports respectively.

2. Connect each display to the output ports respectively.

3. Connect the power adapter to the DC 12V power port, and lock the DC power jack. The power LED will turn blue

after being connected successfully.

4. Power on your device: press the POWER button once, the blue power LED will start to blink for around 30

seconds. After the power LED turns green, the device is ready to use.

5. Power off your device: Long press the POWER button for more than 3 seconds, and the power LED will blink

in blue for around 20 seconds, and then the device will shut down.

WEB GUI

Connect the LAN port to the ethernet to get the IP address for the device.

If the device is connected directly to PC, then the IP address will be automatically assigned as: 169.254.xxx.xxx.

To control the device through the Web GUI, type in the IP address shown on the LCM to the web browser,

https://xxx.xxx.xxx.xxx

Once successfully connected, the login page will show.

Note: Our system only supports HTTPS with AV LINK's self-signed certificate. You may see the warning of

security, press advanced to bypass the security check.

Advanced

Type the account and password to log in.

MaitreView™ 4KPlus Quick Start Guide

Type in account

Default account: admin

Default password: admin

Type in password

Press Login

Note: