AAxeon RS232 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Ochrona przeciwprzepięciowa AAxeon RS232. AAxeon RS232 5 stron. Rs232 to rs232 isolator

RS232 Isolator and Surge Protector

3. Installing the RS233 Isolator

Since this isolator hardware unit should be powered by the external

power source, please connect the 5V AC power adapter or the

USB-to-Power-DC-Jack Conversion Cable to make sure the unit works

properly. If you are using the USB-to-Power-DC-Jack Cable instead of the AC

adapter, please make sure that the USB port is at Host side (the same side

as the DB9 female connector), DO NOT connected to the USB port at the

device side (the same side as the DB9 male connector), otherwise, the unit

won't work and the DC power was passed though the isolation circuits so the

isolator will not function properly.

Use static electricity discharge precautions.

Remove possible static discharge potential from any objects that

the converter may come in contact with before installation. This

can be accomplished by touching a bare metal chassis rail after

you have turned off the power.

Locate an unused PC's RS232 port (with DB9 male connector,

configured as DTE), connect it to the Isolator's DB9 female

connector with a RS232 cable, find another cable to connect the

RS232 Device to the Isolator's DB9 male connector.

Connect

Conversion Cable

the

RS232

Device

Adapter

USB-to-Power-DC-Jack