AAxeon FCM-CHS2 Series Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Podwozie AAxeon FCM-CHS2 Series. AAxeon FCM-CHS2 Series 16 stron. 16-slot in-band management chassis

Drukuj stronę

Remote Management Not Functioning

1. Check LAN LED status

2. Check 10/100Base-T connection

3. Check network configuration

4. Check SNMP manager configuration

5. Reset the In-Band Management Chassis' power

Remote Check

The customer may remotely check the In-Band Management Chassis through

SNMP. For detailed procedures please check the In-Band Management Chassis

Network Management Manual.

4.2 Hardware Replacement Procedures

WARNING

The In-Band Management Chassis contains no user-serviceable parts. DO

NOT, UNDER ANY CIRCUMSTANCES, open and attempt to repair it yourself.

Failure to observe this warning could result in serious injury or death from

electrical shock.

Failure to observe the above warning will immediately VOID any Warranty.

Replace FCM Slide-In Module

Procedure

1. Remove the existing FCM slide-in module

2. Insert new FCM slide-in module carefully into the slot

3. Fix the fastening screw.

Replace FCM Redundant Power Supply

For detailed procedures please check the FCM Redundant Power Supply user's

guide.

4.3 Firmware Upgrade

For detailed procedures please check the In-Band Management Chassis

Network Management Manual.

Make sure that the FCM slide-in module is firmly

connected with the middle plane connector.