Aqua Creek F-004PLB-26 Instrukcja instalacji i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Sprzęt fitness Aqua Creek F-004PLB-26. Aqua Creek F-004PLB-26 17 stron. Pro pool lifttm extended base

Drukuj stronę

BATTERY MAINTENANCE

1. RECHARGE THE BATTERY AS OFTEN AS POSSIBLE. The battery power unit is

a sealed lead acid battery pack. Frequent recharges will prolong the battery life and

maintain a high cold amperage capacity.

2. Do NOT expose the battery to freezing temperatures.

3. Do NOT expose the battery to prolonged periods of extreme heat or severe cold

temperatures.

4. Do NOT expose the battery to long periods of direct sunlight. Heat will shorten your

battery life. Optimum operating temperature is below 20 degrees Celsius (68 degrees F.)

5. Never drop or bump the battery pack. This may result in loose or damaged internal

connections, and may bend the battery terminals.

6. Keep battery terminals clean and free from dirt and corrosion to ensure good contact. The

terminals may be cleaned using Scotch Brite or any similar product. Clean off any

corrosion or discoloration on the very top surfaces of the battery contacts and then apply

dielectric grease (supplied with lift) as shown in the figure below.

U S I N G T H E " E ME R G E N C Y B U T T O N " on the Pro Pool Lift Control Box

On the front side of the control box is a small recessed

but t o n m a r k e d " e m e r g e n c y " . T ake a pen or pencil or other

pointed object and d e p r e s s t h e " e m e r g e n c y " b u t t o n . T his

will bypass the remote control and send a signal directly to

the actuator to raise the seat out of the pool and back to the

deck or up position.

NOTE: This function will only work if there is sufficient

power in the battery, the battery is properly attached to

the control box, and the control box must be operating

properly.