Avlite AV-OL-CTRL-T1 Instrukcja instalacji i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Kontroler Avlite AV-OL-CTRL-T1. Avlite AV-OL-CTRL-T1 20 stron. Obstruction lighting controller
Drukuj stronę
5.0 Safety Information
Before proceeding with installation or service, make sure the following conditions are met:
•
Ensure the tower or mast is grounded (NO RF OR SHOCK HAZARD)
•
Check the mast lighting circuit is not faulty
•
Ensure power lines are not 'live' (NO ELECTRICAL HAZARD)
•
Avoid touching live circuits!
•
Avoid touching any component or any part of the circuitry while the unit is operating.
Do not change components or make adjustments inside the unit with power on.
•
Make sure the mounting pole is vertically aligned to guarantee the required beam
pattern of the obstruction light.
•
When installing, comply with all local electrical code(s).
•
Mains power should always be disconnected when work is being done in close
proximity to electrical fittings, and electrical work should only be done by a licensed
electrician.
•
To ensure that the light and peripheral equipment function safely and correctly, use
cable in compliance with the effective local electrical code.
•
Dispose of the product according to the local laws and regulations for your region, for
example, at a recycling centre that accepts electronic devices.
Latest products and information available at www.avlite.com
AV-OL-CTRL-T1 - Obstruction Light Controller
Installation & Service Manual
9