AVLT-Power AVLT-DM24-1 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki AVLT-Power AVLT-DM24-1. AVLT-Power AVLT-DM24-1 7 stron. Freestanding articulating dual monitor stand for 13”-32” screen size
Drukuj stronęStep 1
Install the Pole to the Desktop
Option A: Weighted Base Install
1. Install the Pole(a) to the Weighted
Base(b) using 3pcs M5x14 Bolts(e),
and tighten using the Allen Key(m), see
Figure 1.
2. Optionally, you can drill a 10mm
diameter hole in your desk and secure
using the Support Plate (h), M10 Wash-
er(i), Spring Washer(j) and M10 Bolt(g).
Fasten the M10 Bolt with provided
Wrench(n), see Figure 2.
Option B: Grommet Base Install
Existing Grommet Hole Installation
If the existing grommet hole comes with a
plastic protector, remove it to ensure a flat
surface before installing the desk mount.
1.Install the Grommet Base Plate(k) to the
Pole(a) using 3pcs M5x14 Bolts(e), and
tighten using the Allen Key(m), see Figure 3.
2. Attach Soft Pad(r) to the Grommet Base
Plate(k), see Figure 4.
3. Position the Pole(a) on the mounting
surface and secure using the Support Plate
(h), M10 Washer(i), Spring Washer(j) and
M10 Bolt(g). Fasten the M10 Bolt using
provided Wrench(n), see Figure 5.
a
Figure 1
e
3
j
b
e
a
k
r
Figure 3
j
h
i
l
g
Figure 2
Figure 4
h
i
g
Figure 5