AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Stojaki i stojaki AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes. AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes 8 stron.
Drukuj stronę2B) Y-pattern: Suitable for all backplate surfaces. Use two sets of bolt/washer/nut to attach
the upper arms and one set of bolt/washer/nut to attach the lower arms to the VESA
plate.
1. Use Bolt (E), Washer (I) with Nut (D) and tighten using Wrench (J), see Figure 3. Note:
Do not fully tighten until instructed to do so in Step 3.
E
2C) Inverted Y-pattern: Suitable for flat and top backplate surfaces. Use two sets of bolt/
washer/nut to attach the lower arms and one set of bolt/washer/nut to attach the upper
arms to the VESA plate.
1. Use Bolt (E), Washer (I) with Nut (D) and tighten using Wrench (J), see Figure 4. Note:
Do not fully tighten until instructed to do so in Step 3.
E
4
J
D
I
Figure 3
J
D
I
Figure 4