A.H.Beard INVIGORATE Instrukcja montażu i obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Wyposażenie wnętrz A.H.Beard INVIGORATE. A.H.Beard INVIGORATE 16 stron. Adjustable base assembly and operation manual
Drukuj stronęPAIRING YOUR REMOTE & BASE
Your new base is already paired with the remote supplied. If the base does not initially operate, you
may need to reconnect the remote and base following the instructions below.
1.
Press the pairing button located on the control box twice until the LED light turns on.
2. Once the LED light turns on, you now have 10 seconds to complete the pairing process. Press
and hold the Raise back rest and Raise leg rest buttons simultaneously until the LED light on the
remote flows continuously.
IMPORTANT NOTES:
If multiple bases are being used in the
same house or area, each base should be
configured with its own remote control.
Do not pair both control boxes to the
same remote or movement could occur
on additional base unexpectedly.
Please repeat the above steps if the
pairing operation failed..
SYNCHRONISING TWO SPLIT BASES
If you have a split-base and require simultaneous operation of the two bases, you must first
successfully pair the first base control box to your remote control using steps 1 and 2 from above. For
the second base control box please follow the steps below.
1.
Press the pairing button located on the control box twice until the LED light turns on.
2.
Once the LED light turns on, you now have 10 seconds to complete the pairing process. Press
and hold the Lower back rest and Lower leg rest buttons simultaneously until the LED light on the
remote flows continuously.
POWER OUTAGE
In the case of a power outage, insert two (2) 9V batteries (not included) into the battery compartment
of the power supply. This option can be used as back up power to return your adjustable base to the
flat position. Do not sit on the adjustable base or apply any load when using the back up battery power
to return your base to the flat position.
11