AVM OVATION CD 6.2 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD AVM OVATION CD 6.2. AVM OVATION CD 6.2 19 stron.
Również dla AVM OVATION CD 6.2: Instrukcja obsługi (19 strony)

Drukuj stronę

PROG

In case of a currently active track programming both the currently playing track and the total

number of programmed tracks is displayed on the left-hand side (for example "PROG 2/17").

RND

In case the random play mode is activated, the currently playing track and the total number of

programmed tracks are displayed on the left-hand side (for example "RND 5/12").

2.3.2

Display in D/A converter mode

On the left-hand side the name of the currently selected input is displayed. If there is no

incoming signal available at the currently selected input, NO DIG SIGNAL or NO USB

PLUGGED is shown right next to the input name.

2.4 CD Player

2.4.1

Playable disc formats

Your CD Player can play back all compact discs which are recorded according to the red

book standard (means the standards for audio CDs established by Philips and Sony).

Furthermore all CDRs and CDR/Ws with good reflection recorded according to this standard

are playable. Most copy protected discs are also playable. But we cannot take responsibility

that all future copy protection systems are playable.

2.4.2

Insert / eject

Insert a CD

Your CD Player is provided with a slot-in CD drive (8). Insert the CD (coverside up) and push

slightly. The drive will now automatically draw the disc inside. After that the player reads the

TOC (table of contents) and shows it on the display. Most left is the number of the actual

track followed by the total number of tracks on the CD (for example "1/17"). The middle of the

display shows the total playing time of the CD.

NOTE: If there is still a CD inside or the unit is in stand by, the slot will be blocked. If the

inserted disc is not readable (DVD, data-CD) the display will show NO AUDIODISC.

Eject CD

Press the EJECT button (15). Then the disc will be ejected. If no CD is inserted, the display

shows NO DISC.

AUTO PLAY

If CD is not selected as source the unit will automatically change to CD from any other input

as soon as a CD is inserted. If AUTO PLAY is activated (see 0), the CD player will start

playing automatically every time a CD is inserted. If AUTO PLAY is deactivated, the CD

player will read the TOC (table fo contents) of the inserted disc and then go to STOP mode.