AVM OVATION CD 6.3 Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD AVM OVATION CD 6.3. AVM OVATION CD 6.3 19 stron.

3.1.3

Set autoplay

When AUTO PLAY is activated, the CD player will start playing automatically every time a CD

is inserted. IF AUTO PLAY is deactivated, the player will read the TOC (table of contents) of

the inserted disc and then go to STOP mode.

3.1.4

Skip unused inputs

Unused inputs can be deactivated (SKIPPED). Your device will then skip these inputs when

the source selectors (2, 3) are applied or if you select a sound source via the RC 3 remote

control.

3.1.5

Define input names

You can individually set the names (max. 8 characters) of the different sources shown in the

display. To adjust a name, proceed as follows:

Press one of the option keys (2, 3) to select an input. Press REPEAT (6) to select the position

and use the SKIP buttons (13, 14) to define the character (holding the key pressed changes

the character every half second).

3.2 Reset (factory default settings)

The Reset menu cancels certain or all settings and makes the unit return to default settings.

To enter the Reset menu, please switch off your device on the rear of the unit at the mains

switch (29). Keep both the REPEAT button (6) and the STOP button (10) pressed while you

switch on the unit again (29). As soon as the display shows the reset menu you can release

both buttons (6, 10).

Select if you just want to clear the input names (NAMES) with the PAUSE button (11) or reset

the unit completely (ALL) by pressing the PLAY button (12).

Pressing the STOP button (10) will bring the unit back to normal operating mode without

resetting any item (CANCEL).