Aqua Creek Products F-045SCH-02 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Aqua Creek Products F-045SCH-02. Aqua Creek Products F-045SCH-02 13 stron. 24v solar charger for use with revolution, scout and titan
Drukuj stronę
(UNDERNEATH)
Once the solar charger has been installed and both the control box and battery have been plugged in,
and there is suffi cient daylight, the 24V Solar Charger will turn on and start trickle-charging the battery.
Without both the control box and battery being plugged in, the 24V Solar Charger will be off and will
remain off until both components are plugged in.
When a 24V battery is installed onto the lift, and there is suffi cient daylight, the GREEN LED will turn
on to show a 24V battery has been detected and the charger is operational. If a fully charged battery
is being used, the YELLOW LED marked "H" will light up as well. If a non-fully charged battery is being
used, either the YELLOW LED marked "M" or the YELLOW LED marked "L" will turn on, depending on how
drained the battery is.
See the table in the image above for more descriptions on what all of the LED lights mean when they are
either on or off .
The 24V Solar Charger will continue to charge the battery, even as the lift is being used. So once the 24V
Solar Charger has been installed it will function without any need for adjustment. The user should check
the indicators periodically to make sure it is working.
10
Copyright © 2019 Aqua Creek Products All Rights Reserved
Solar Charger Operation
CHARGE
CONTROLLER
24V
BATTERY
LED LIGHT
GREEN LED
YELLOW LED
CHARGE
CONTROLLER
STATUS
ON
SLOW FLASH
FAST FLASH
OFF
YELLOW LED 1 (L) ON
YELLOW LED 2 (M) ON
YELLOW LED 3 (H) ON
OFF
RED LED
FLASH
FUNCTION
MAIN CHARGE DURING DAYTIME
FLOAT CHARGE
EQUALIZATION CHARGE
CONTROLLER CONNECTED TO BATTERY,
NIGHT DETECTED
BATTERY POWER LOW
BATTERY POWER MEDIUM
BATTERY POWER HIGH
NORMAL OPERATION
OVERLOAD OR SHORT-CIRCUIT OF LOAD
Revised 6/14/19