Aqua Creek Products F-045SCH-02 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Aqua Creek Products F-045SCH-02. Aqua Creek Products F-045SCH-02 13 stron. 24v solar charger for use with revolution, scout and titan
Drukuj stronę
24V SOLAR PANEL
ASSEMBLY
1/4" FLAT WASHER (2)
1/4" NYLOCK NUT
SOLAR CHARGER
MAST POLE
SOLAR CHARGER
MOUNTING BRACKET
CONTROL BOX
CONNECTOR
Before installing the 24V Solar Charger to the lift, fl ip-up the 24V Solar Panel Assembly and install the
1/4" button head bolt as shown in the diagram above. The 24V Solar Charger bolts directly to the mast
of the lift and may be left on the unit 24 hours a day. In most cases this will mean the battery will not
need to be charged during the day, or for heavy usage will not need to be put on the AC wall charger as
often. To install the 24V Solar Charger, remove the four (4) 3/8" Nylock nuts and fl at washers from the lift
as shown, and install the charger. The control box connector plugs directly into the control box as shown
above and on page 8.
2
Copyright © 2019 Aqua Creek Products All Rights Reserved
Unpacking and Installation
1/4" BUTTON HEAD
FUSE BOX
SOLAR
CHARGER
3/8" FLAT
WASHER (4)
3/8"
NYLOCK (4)
CHARGER
CABLE
FUSE BOX
CONTROL
BOX
PLUG INTO
CONTROL BOX
24V IN/OUT
(FAR RIGHT)
Revised 6/14/19