AQUA DREAM AD-1060-WT Instrukcja montażu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akwaria AQUA DREAM AD-1060-WT. AQUA DREAM AD-1060-WT 8 stron.
Drukuj stronę1 - Attach the outflow pipe to the underside of
the tank. Be sure to guide the pipe end into
the guide hole at the top of the filter box
before tightening it down. [Fig. 1 and Fig. 2]
2 - Locate the Outlet Valve Hose. [Fig. 3]
3 - Insert the rubber gasket inside the end of the
outlet valve hose, then attach the outlet valve
hose to the underside of the tank.
[Fig. 4, Fig. 5, Fig. 6]
4 - Use a Philips head screwdriver to tighten
the O-ring Clamps at both ends of the Outlet
Valve Hose. [Fig. 7 and Fig. 8]
©2023 AquadreamUSA all rights reserved
www.aquadreamusa.com
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Plumbing Assembly 1