AQUA DREAM AD-1260-WS Instrukcja montażu - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akwaria AQUA DREAM AD-1260-WS. AQUA DREAM AD-1260-WS 8 stron.
9 - Tighten the metal O-ring clamps onto both ends
of the hose and lower the water pump into its
bay in the filtration system.
[Fig. 16, Fig. 17, Fig. 18]
10 - Install the rubber gasket in the end of the
inlet hose and attach it to the underside of
the tank. [Fig. 19 and Fig. 20]
11 - Feed the pump's power cable through the
hole in the back of the tank. [Fig. 21]
©2023 AquadreamUSA all rights reserved
www.aquadreamusa.com
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig.20
Fig. 21
Plumbing Assembly 3