AB Quality 2727-G7P20D1Q6 Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Terminale dotykowe AB Quality 2727-G7P20D1Q6. AB Quality 2727-G7P20D1Q6 20 stron.

MobileView Guard G750

Important User Information

Because of the variety of uses for the products described in this publication, those

responsible for the application and use of this control equipment must satisfy

themselves that all necessary steps have been taken to assure that each application

and use meets all performance and safety requirements, including any applicable

laws, regulations, codes and standards.

The illustrations, charts, and layout examples shown in this guide are intended

solely for purposes of example. Since there are many variables and requirements

associated with any particular installation, Allen-Bradley does not assume

responsibility or liability (to include intellectual property liability) for actual use

based upon the examples shown in this publication.

Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation

and Maintenance of Solid-State Control (available from your local Allen-Bradley

office), describes some important differences between solid-state equipment and

electromechanical devices that should be taken into consideration when applying

products such as those described in this publication.

Reproduction of the contents of this copyrighted publication, in whole or part,

without written permission of Rockwell Automation, is prohibited.

Throughout this manual we use notes to make you aware of safety considerations:

ATTENTION

Attention statements help you to:

• identify a hazard

• avoid a hazard

• recognize the consequences

IMPORTANT

Allen-Bradley is a trademark of Rockwell Automation

Publication 2727-QS002E-MU-P

Identifies information about practices or circumstances that can

lead to personal injury or death, property damage, or

economic loss.

Identifies information that is critical for successful application

and understanding of the product.