AQUA FORTE EconoSieve Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody AQUA FORTE EconoSieve. AQUA FORTE EconoSieve 10 stron.

Drukuj stronę

Pump connection

The EconoSieve comes with a flexible

reducer fitting of 90 x 63mm (3" to 2").

The 90mm/3"part fits on the pump

outlet of the EconoSieve and the

63mm/2" part can be used to push a

63mm/2"pipe through towards the end

of the EconoSieve to prevent the pump

from sucking in air bubbles.

Waste outlet

The EconoSieve comes with a 63mm

waste outlet that can be connected to

the supplied 50mm slide valve with the

supplied flexible socket.

It is recommended to monitor the EconoSieve every day. Maintenance is very easy because of

the waste outlet. In fact maintenance is about two operations:

To remove the waste that is on the surface of the sieve (every day).

To remove the waste that has gone into the profile wires of the sieve (only when

necessary).

Removing the waste that is on the surface of the sieve is very easy by opening the waste

outlet and to rinse the waste away with a normal hose pipe. Another method to have water

run over the screen is pushing down the bended plate which will flood the screen with

water (see picture).

To remove the waste that has gone into the profile wires of the sieve you will need a hose

pipe with a powerful spray nozzle or a high-pressure machine. For this way of cleaning you

have to place the sieve in an upright position or take the sieve out of the unit.

After a certain period of time the sieve can get "fat" and this will make it more difficult

for the water to go through. You can clean the sieve with i.e. alcohol.

Note: when you use the sieve for the very first time the surface of the

sieve can also be covered with a very thin film. Make sure you will

clean the sieve very thorough with alcohol before using it.

Technical Specifications

SIZE

HOUSING

64 x 37 x 99 cm

INLET

110 mm outer Ø

OUTLET

90 mm/63 mm

WASTE

63/50mm

SIEVE BEND

450 x 345 mm

CAPACITY

WEIGHT

AquaForte is a trademark of Sibo BV Veghel www.aqua-forte.nl

Maintenance

MATERIAL

8 mm polypropylene

plate

polypropylene

90mm = PP

63 mm = PVC

PVC Slide vlave

Stainless Steel 304

EXTRA INFO

2 x 110 mm inlet

300 micron

Max. 25 m³/h

±25 Kg. Incl. sieve

ENG

110mm inlets