Avocent DSR Series DSR4020 Informacje o wersji oprogramowania sprzętowego - Strona 2

Przeglądaj online lub pobierz pdf Informacje o wersji oprogramowania sprzętowego dla Przełącznik Avocent DSR Series DSR4020. Avocent DSR Series DSR4020 3 stron. Avocent dsr series dsr1020: install guide
Również dla Avocent DSR Series DSR4020: Specyfikacja sprzętu (2 strony), Uwaga dotycząca wydania (3 strony), Informacje o wersji oprogramowania sprzętowego (3 strony), Informacje o wersji oprogramowania sprzętowego (3 strony), Uwaga dotycząca wydania (3 strony), Uwaga dotycząca wydania (2 strony), Uwaga dotycząca wydania (1 strony), Uwaga dotycząca wydania (2 strony), Specyfikacje (2 strony), Instrukcja szybkiej instalacji (8 strony)

=============================================================================

This release contains the following enhancements:

1. Force DSAVIQ-USB2 and DSAVIQ-USB2L modules into USB 1.1 Full Speed mode to address

certain target computer BIOS incompatibility with USB 2.0 composite devices.

2. Revised DSAVIQ-USB2 and DSAVIQ-USB2L modules' USB enumeration to "map-as-needed"

only one virtual media device (CD-ROM by default) to address certain target computer BIOS

incompatibility with USB 2.0 composite devices.

3. Added support for Server Technology CW-48 power control device.

4. Added support for USRobotics Courier 56K Business Modem model 3453B dial-in security

(callback mode).

5. Added access control lists for local port users. If a user attempts to connect to a target device in

which they do not have access rights, the connection will not be allowed and the OSCAR®

graphical user interface will notify the user that access was denied due to insufficient access

rights.

6. Support for On-board Web Interface (OBWI) KVM sessions from Mac OS X clients (Mozilla Firefox

browser only).

7. Added support for bookmarks in OBWI.

8. Added Video Noise Compensation checkbox to the OBWI.

9. Simplified the Security Configuration console menu for one option to restore all security settings to

factory default to allow the DSR switch to be discovered by any DSView 3 software server.

=============================================================================

This release contains the following fix:

1. Resolved issue where Retina® Network Security Scanner causes a DSR switch to lose remote

connectivity.

2. Resolved issue where mouse cursors could not be aligned on target devices using certain virtual

media capable IQ modules.

3. Resolved issue where the status of a remote exclusive KVM session would be changed from

exclusive mode to normal mode if a stealth share session connected to the same target device

and then disconnected.

4. Resolved issue when the viewer is set to full screen mode using the default viewer settings then

the viewer screen would start to blink.

Enhancements

Fixes