aqua greek products F-PPP2S Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Systemy podnoszenia aqua greek products F-PPP2S. aqua greek products F-PPP2S 10 stron.
Portable Pro Pool 2 Assembly Instructions (Weight Plates)
1. Using a 7/16" wrench, remove the four (4) nylock nuts and at washers that are currently
holding the hood onto the platform. These were installed strictly for shipping purposes and
can be thrown away. Remove the hood and set aside.
2. Begin stacking the eleven (11) supplied weight plates on the portable platform. To ensure
proper alignment, slide the hood over the stack every three (3) or four (4) plates. Continue
this until all eleven (11) weight plates are in place.
3. Using a 7/16" wrench, slide the hood over the stack of weight plates and attach to the
platform using the twelve (12) supplied 1/4" nylock nuts and at washers. NOTE: Be sure to
use silicone to seal the fl ange before bolting together.
BALLAST COVER
WEIGHT PLATES (11)
1/4 FLAT WASHERS (12)
1/4 NYLOCK NUTS (12)
Copyright © 2020 Aqua Creek Products All Rights Reserved
TOOLS REQUIRED:
• 7/16" wrench
3
Revised 7/28/20