Avocent LongView 5000 series Podręcznik instalatora/użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik instalatora/użytkownika dla Przedłużacz Avocent LongView 5000 series. Avocent LongView 5000 series 16 stron. Kvm extender system
Drukuj stronęProduct Overview
®
The Avocent
LongView™ 5000 series high performance KVM extender system is a DisplayPort KVM
extender that enables you to locate your critical computing hardware in a secure and temperature controlled
environment away from the user workstation while maintaining the same user desktop experience. Using
either one or two CATx cable links you can achieve separation distances of up to 150 meters/492 feet
between the transmitters and receivers. At such distances the units can transfer high resolution DisplayPort
video, USB 2.0 (low/full and hi-speed), digital and analog audio plus RS-232 serial.
Features and Benefits
Video support
The LongView™ 5000 extender system provides the highest possible video bandwidth between the
transmitters and receivers. To allow for the differing grades of CATx links, the extender system periodically
checks the quality of the link and can accurately determine which of the two video transfer modes can be
supported. In low rate mode, the local and remote extender units may be placed up to 492 feet (150 m) apart.
The units actively monitor video link quality and at link distances of less than 328 feet (100 m). High rate mode
provides a second video port and more than twice the video bandwidth capability. In high rate mode, there is
enough video bandwidth to support a single high resolution 2560 x 1600 display or two 1920 x 1200 displays
(at 60 Hz refresh) or even 4K video, 4096 x 2160 (at 30 Hz refresh, single display).
EDID management
The extender system intelligently manages the EDID (Extended Display Identification Data) information that
each video display provides before reporting to the host computer. If sufficient bandwidth does not exist for
the modes declared by the second display, it is not reported to the host computer.
USB support
A wide range of USB devices are supported on the receiver via the four ports on the front of the unit. Three of
the ports support low/full speed (version 2.0) USB for keyboards and mice. The fourth port provides hi-speed
(version 2.0) USB with transfer rates up to 80 Mbits/sec and supports mass storage and isochronous devices.
NOTE: Availability of the fourth USB port depends upon the use of CATx link B cable which is used for the
transport of hi-speed USB signals.
Audio support
The LongView extenders can transfer analog and digital audio signals across the CATx cable link. Standard
analog audio is supported through 3.5 mm jacks on the transmitters and receivers. Additionally, the line-in jack
on the transmitter and the line-out jack on the receiver are dual purpose. They can accept either 3.5 mm
analog jacks or mini-TOSLINK optical fiber connectors.