Avocent ACS 6000 Instrukcja szybkiej instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Sprzęt sieciowy Avocent ACS 6000. Avocent ACS 6000 20 stron. Advanced console server
Również dla Avocent ACS 6000: Informacje o wersji (4 strony), Informacje o wersji (5 strony), Informacje o wersji (5 strony)
Drukuj stronę
QUICK INSTALLATION GUIDE
5
Connecting the power cable(s)
and turning on the console server
For AC powered units, connect the
power cable to the console server. For
DC powered units, please consult the
ACS 6000 Installation/Administration/
User Guide.
Connecting to the Console port
6
Using one of the supplied RJ-45
console adaptors, connect a terminal
or workstation to the Console port on
the console server. The console server
will be configured using a terminal
or terminal emulator with session
settings of: 9600, 8, N and 1, with no
flow control.
7
Connecting to the AUX or
modem port (AUX/modem port on
some models)
For models without an internal modem,
connect an external modem or
supported PDU. For models with an
internal modem, connect a phone line.
NOTE: All remaining manual setup steps
are required the first time you configure
the ACS 6000 advanced console server.
Configuring network parameters
8
Log in to the console server as admin,
with the default password avocent. At
the command prompt, enter wiz to view
the current IP configuration.
To Contact Avocent Technical Support: Visit www.avocent.com
Avocent and the Avocent logo are registered trademarks of Avocent Corporation or its affiliates in the U.S. and other countries. ©2009 Avocent Corporation.
ACS 6000
Advanced Console Server
NOTE: DHCP is the default IP
configuration. If no DHCP server is
available, the console server must be
reconfigured manually as described
below.
To change the IP configuration, press
Enter to move through the parameters,
accepting the current values. Type the
new value for the selected parameter or
press Ctrl + E to edit the current value.
When you are finished, enter yes to
confirm and save the new parameters.
Completing the First Time
9
Configuration screen
To configure the ACS 6000 advanced
console server for the first time, open
a web browser and enter the console
server's IP address in the address
field. Press Enter to access the
Web Manager.
Log in to the advanced console server
as admin with the password avocent.
The Security screen of the Wizard tab
appears. Perform the configuration
described in the steps below.
Step 1 - Security Profile
Select the desired Security Profile. Click
Next when finished.
Step 2 - Network Parameters
Set the desired Network parameters.
Click Next when finished.
Step 3 - Ports
The default CAS Profile configuration
will be applied for all serial ports. Check
the box to enable all ports and set the
desired CAS Profile parameters. Click
Next when finished.
Step 4 - Change root/admin
Password
Click the root link in the Users table. The
Root User Information screen appears.
Enter the new password in the Password
field and confirm it. Click Next. Click the
admin link. The Admin Information screen
appears. Enter the new password in the
Password field and confirm it. Click Next.
Click the Save button to apply and save
the configuration.
The console server is now configured
and ready to accept users and
connections to the ports.
590-769-629C