Aqua Medic 410.17 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akwaria Aqua Medic 410.17. Aqua Medic 410.17 16 stron.

7. Failures

Failures may arise if:

- The ratio between supplied air and the water volume is not correct.

Cause:

The air injection nozzle is clogged or the pump chamber containing the and Power Wheel is dirty.

Action:

Dismantle the venturi pump, clean it thoroughly. Carefully clean the air injection nozzle with a thin brush or

blunt instrument and re-assemble the pump again.

- The venturi pump does not re-start after an interruption of the power supply.

Cause:

The water pressure is too high.

Action:

Let the water out up to the height of the pump to lower the water pressure. Re-start the pump.

8. Warranty conditions

AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material

and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by

this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or

drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,

we will repair the product for free by installing new or renewed parts. This warranty only covers material and

processing faults that occur when used as intended. It does not apply to damage caused by transport, improper

handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of

a fault with the unit during or after the warranty period, please contact your dealer. All further steps

are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to

us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages

resulting from the use of any of our products.

AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany

- Technical changes reserved – 09/2019/v4