ABACO DVL480 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy podnoszenia ABACO DVL480. ABACO DVL480 20 stron. Glass vacuum lifter

IV. INSTRUCTION FOR USE:

1. Before Operations:

Caution:

- Make sure the battery is fully charged before using the lifter.

- Check the suction cups are free from damage. If it was damaged,

make sure to replace it with a new suction cup.

- Check there is no leakage of vacuum pressure.

- Make sure the glass surface and suction cups are clean and free

from dust.

- Ensure buttons, pressure and voltage indicators functionally all

right and operate well.

- Run idle smoothly without any noise.

2. During Operations:

Caution:

- Always pay attention to alarm signal caused by such as pressure

and voltage gauges (battery voltage shall be around 13VDC when

fully charged and lower side shall be around 11VDC)

- Stop working immediately when detected abnormal phenomena

such as; noise, vacuum leakage, deformation of any parts, and so on.

- Ensure maximum safety in the working area to avoid accidents

when moving or lifting glass sheets.

3. After Operations:

Caution:

- Lock all the safety locks and valves when not in use.

- Store the suction cups in a cool and not humid place.

- When storing, avoid distortion and deformation of any part of the

lifter.