Aqua Medic Biostar Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody Aqua Medic Biostar. Aqua Medic Biostar 12 stron.

1. Working principle

The water flows from the aquarium through a pre-filter sponge by gravity into the filter housing.

From here, it is pumped on the Biorotor sponge. This sponge is partly submerged (1/3) and starts

to rotate by the power of the flowing water. The result is an optimum oxygen supply for all bacteria

that settle on the sponge wheel and a very high biological capacity, comparable to wet dry filter

systems.

At the same time a part of the water is pumped back into the aquarium. The water inlet is

automatically evacuated, the water level in the filter is controlled by a mechanical float switch.

2. Parts of the Biostar

The Biostar contains the following parts:

1. Filter housing

2. Lid

3. Holding clamps (2 pcs)

4. Biorotor (sponge) with shaft

5. Level switch

6. Water in- and outlet

7 . Filter basket with sponge

8. Pump

45°- elbow for connection

of the pump

10. Air hose

11. Sponge for pre-filter

12. Suction nozzle

13. Hose connection

14. 45°-outlet elbow

15. Adjustion screw

16. Power cord

Fig.: 1: Biostar