Aqua Medic aquastarlight T5 Instrukcje obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcje obsługi dla Produkt do pielęgnacji zwierząt domowych Aqua Medic aquastarlight T5. Aqua Medic aquastarlight T5 8 stron. 92 cm 4 x 39 w 122 cm 4 x 54 w 152 cm 4 x 80 w

Drukuj stronę

1. Technical Data

Line voltage: 230 Volt/50 Hz (if not stated otherwise on the ID-label).

Bulbs:

The lighting systems are delivered either with bulbs for salt water or for fresh water aquariums.

Salt water version:

Fresh water version:

2. Unpacking

On unpacking, please check the lighting system immediately for any damages. In case of any

complaints, please contact your dealer directly.

3. Safety Instructions

The lighting system must not be used as an aquarium cover, only above the aquarium. The

•

minimum distance between lighting and aquarium must be 30 cm.

The

lighting

system

•

The housing and protection glass may become very hot during operation. Be careful when

•

touching them! In case of changing bulbs or for cleaning purposes, disconnect the light from the

mains and let it cool down. Then you can take the lighting system off.

When cleaning, take care that no humidity passes the ventilation and enters the interior of the

•

lighting system!

Pay attention to a sufficient heat exchange by keeping the ventilation slits free! The light may

•

not be installed behind panels or in covers. Insufficient ventilation leads to overheating of the

light and may damage the electrical components.

In any case, please don't try to repair the lighting system yourself but send it to AB Aqua Medic

•

for checking, preferably together with a list of defects.

4. Installation

Suspension: The light is supplied with a steel cable.

It is an elegant and simple possibility for the assembly of the aquastarlight and other lights at the

ceiling.

Included in shipment: The suspension systems includes 2 pieces of each of the following:

- 2 metres of stainless steel incl. stopper

- ceiling plate incl. retaining bush

- light fixing

- screws and plugs

Mounting:

Fixing onto the ceiling:

First of all, both the ceiling plates (1) have to be mounted to the ceiling securely by using screws

and plugs. The two suspension points on the ceiling can be marked the following way:

The suspension points have always to be 15.5 cm from each end of the lamp. Therefore, the

distance between both points is:

- aquastarlight T5 4 x 39 W

- aquastarlight T5 4 x 54 W

- aquastarlight T5 4 x 80 W

2 x Ocean White + 2 x Ocean Blue

2 x Ocean White + 2 x Planta

may

not

( 92 cm total length):

(122 cm total length):

(152 cm total length):

operated

without

62 cm

92 cm

122 cm

the

protection

glass.