ALLIED MEDICAL Quantum Q6 Edge 2.0 Instrukcja konfiguracji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Wózek inwalidzki ALLIED MEDICAL Quantum Q6 Edge 2.0. ALLIED MEDICAL Quantum Q6 Edge 2.0 6 stron.
Drukuj stronę
Armrest/s Adjustments
Two Post Armrest
To adjust the armrest height
•
Push the spring-loaded lever inward. See figure 1.
•
Move the armrest up or down to the desired height.
•
Rotate the spring-loaded lever outward and lock the armrest in place. If necessary, move the
armrest up or down to ensure that the armrest is secure.
To lift up and or remove armrest
•
Push the spring-loaded lever downward and pull up on the front of the armrest. See figure 2.
•
Remove the detent pin from the back of the seat. See figure 3. Pull up on the rear of the
armrest to remove the assembly.
Heavy Duty Armrest
To adjust the armrest height
•
Remove screws 1 and 2. See figure 1 below.
•
Slide the armrest up or down the detent bar to the desired height.
•
Re-install screws 1 and 2.
•
Repeat for the other armrest if necessary.
•
If you cannot get the desired height you may need to order detent bar 10"-14"