Avonic CM-CON100 Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera bezpieczeństwa Avonic CM-CON100. Avonic CM-CON100 13 stron. Ptz camera controller
Również dla Avonic CM-CON100: Podręcznik użytkownika (12 strony), Podręcznik użytkownika (10 strony), Podręcznik użytkownika (11 strony), Podręcznik użytkownika (16 strony)
Drukuj stronę
Operation Instructions
Menu
After powered on, "USER PIN" will show on the controller's screen. The initial pin is "111111".
Operation
Enter USER PIN
Pin Error：When"USER PIN：ERROR" shows on screen, it indicates wrong pin was input. Enter
correct pin to get to next step
Pin Correct：Screen shows" 1"camera icon and default camera number. If there is no operation,
after 5 seconds the screen will display the current time. If still no operations, the controller will
enter sleepmode (30sec, 1min, 5min, 10min, 30 min or 60 min.)
Enter menu
Menu List
Camera Setting
Camera ID
Protocol setting
Baud rate setting
Address Setting
Increment
www.avonic.eu
Button
Press SETUP key
10
Screen
USER PIN:
ADMIN PIN:
CAMERA SETTING
：
PROTOCOL：
PELCO D
BAUD RATE：
2400
ADDRESS: 1
INCREMENT:
Comment
The initial USER pin is
"111111"
See "PIN SETTING" to
set pin.
The initial ADMIN pin
is "111111"
See "PIN SETTING" to
set pin.
Move up / down the
joystick, choose
"CAMERA SETTING"
0-255, use num keys,
press ENT to confirm
PELCO D/PELCO P
/VISCA
2400/4800/9600 /
19200/38400
0-255
1-20