CP Electronics MWS5 Instrukcja obsługi produktu - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Czujniki bezpieczeństwa CP Electronics MWS5. CP Electronics MWS5 12 stron. Miniature ceiling mounted microwave presence detector
Drukuj stronę8. Specification
LOAD
6 Amps fluorescent and incandescent lighting.
3 Amps compact fluorescent lighting.
3 Amps low energy lighting.
3 Amps low voltage lighting (switch primary of transformer).
Switch SON lighting loads via a contactor.
-DD Digital Dimming output power supply versions - up to 10 dimming ballasts.
-AD Analogue Dimming output power supply versions - up to 10 dimming ballasts.
SUPPLY VOLTAGE
LIGHT LEVEL
TERMINAL CAPACITY 1.5mm
MATERIAL
TYPE
TEMPERATURE
SAFETY
CONFORMITY
9. Part Numbers
Sensor Head
MWS-5
MWS5-D
Power Supply Unit
MWS5-PSU
MWS5-PSU-DD/SA Direct Dim power supply unit (suitable for MWS5–D sensor head)
MWS5-PSU-AD/SA
Accessories
DD-LCDHS
UHS
UHS3
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE wiring regulations.
FM 45789
EMS 534520
Due to our policy of continual product improvement CP Electronics reserves the right
to alter the specification of this product without prior notice.
page 12
220-240 Volts AC 50 Hz
Light to dark
2
Sensor head, surface mount baseplate, flush bracket — Flame retardant ABS
Power supply unit housing — Glass filled PA (polyamide)
Flange mount bracket & Lens—PMMA (Clear acrylic)
Class 2
-10°C to 80°C
The microwave radiation emitted by these units is exteremely low power. At a
distance of > 50mm the power density is <6% of the ANSI IEEE C95.1 –1991
recommended microwave power density. At a distance of 5mm from the unit it is
<84% of recommended power density.
EMC-89/336/EEC
LVD-73/23/EEC
Non-dimming sensor head with mounting brackets included
Direct dim sensor head with mounting brackets included (suitable for –DD and –AD)
Non-dimming power supply unit (suitable for MWS5 sensor head)
with DSI / DALI digital dimming output
Dimming power supply unit (suitable for MWS5–D sensor head)
with 1-10V analogue dimming output
IR remote control programming handset with LCD screen
IR remote control user handset with lux and scene setting functionality
IR remote control user handset with on/off override only
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
Ref #WD199 Issue 6